DMS CTS-V Drag Brake Kit
<b>DMS CTS-V Drag Brake Kit</b>

Alternative Views:

DMS CTS-V Drag Brake kit

Dedicated Motorsports brings you a bolt on brake solution for the 2009-2015 Cadillac CTS-V. This kit is designed to drop rotational mass, overall weight off the nose and provide clearance for lighter smaller front wheels. Utilizing a radial mounted 6 piston Wilwood caliper combined with a high performance 2 piece rotor, there is more than enough stopping force to slow down the heavy CTS-V chassis. We've used this kit to stop a 4300 pound V from 155 mph without brake fade. This brake kit will also open up some new wheel options with the added caliper and rotor clearance. We've used some of the smaller 17" Belak and Weld wheels on this brake kit. Depending on back pad and offset the use of a .090-.125 thick spacer may still be required.

Drops 17-18 pounds per side.

Whats in the box:

- 6 Piston Calipers
- Caliper Brackets
- 2 Piece 12.88" Rotors
- Performance Pads
- Braided Brake Lines
- Fittings
- Caliper shims
- Rotor Hardware

This kit is intended for Drag Racing use only. While we've tested this setup on a heavy car it is the end users responsibility to make sure the kit is right for their type of driving or track conditions. Install instructions are not included currently included and does require attention to detail while shimming the calipers.

List Price: $1,869.99

Availability: Usually Ships in 2 to 3 Business Days
Product Code: DRAGBB


Share your knowledge of this product. Be the first to write a review »