Trick Flow Track Max .575" Lift Camshaft for GM LS3
Trick Flow Track Max .575" Lift Camshaft for GM LS3


 
Trick Flow Track Max .575" Lift Camshaft for GM LS3

Specifications:
Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 2,500-6,300
Intake Duration at 050 inch Lift: 220
Exhaust Duration at 050 inch Lift: 224
Duration at 050 inch Lift: 220 int./224 exh.
Advertised Intake Duration: 286
Advertised Exhaust Duration: 282
Advertised Duration: 286 int./282 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.575 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.575 in.
Valve Lift with Factory Rocker Arm Ratio: 0.575 int./0.575 exh.
Lobe Separation (degrees): 112
Camshaft Gear Attachment: 3-bolt
Computer-Controlled Compatible: Yes
Valve Springs Required: Yes
Camshaft Manufacturers Description: Good idle, strong midrange/top-end power, 2,500-6,300 rpm powerband, computer modification recommended. Compression: 10.5:1 minimum. With 3-bolt cam gear mounting and rear integral LS1/LS6 camshaft sensor pick-up ring.
Quantity: Sold individually.

Notes: This camshaft is not compatible with Active Fuel Management. An AFM delete kit and disabling the AFM through the ECM is required. Minimum 10:5:1 compression and LS1/LS6 style sensor pick-up ring. Custom computer tuning required.

Give your GM LS-powered hot rod significant horsepower and torque increases with a Trick Flow® Track Max® Hydraulic Roller Camshaft. These camshafts are dyno-proven to produce a wide power curve over the entire rpm range, not just at a particular rpm point or peak. The camshafts are cut from premium blank cores and checked for proper hardness before being precision ground to exact tolerances.
List Price: $349.97

Availability: Usually Ships in 24 Hours
Product Code: TFS-30602002
Qty:

 

Share your knowledge of this product. Be the first to write a review »